Skip to main content
FREE Delivery!|(601) 706-3281

Quitman County, Mississippi ยท Free Delivery

Bulk Gravel Delivery to Sledge, MS

Free delivery to Sledge on every order, with loads arriving in as fast as 2 business days.

Delivering to Sledge, MS

Free delivery on every order.

  • Free delivery to Sledge
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Sledge

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Sledge

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Sledge

Decorative delivered to Sledge

Rounded stone for beds, borders and water features.

Sand delivered to Sledge

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Sledge

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Sledge works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Sledge.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Sledge addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Mississippi Rock Supply brings gravel and aggregate delivery in Sledge, MS to driveways, patio bases and drainage runs. If you are building a walkway or bedding pavers, the material that does the fine work is stone screenings.

If you are laying a drive or a building pad, start with 610 limestone.

Sledge sits in Quitman County, where the ground is flat and the subsoil is tight clay that takes water slowly. That shapes what you put down before anything else.

Ground and Conditions in Sledge

Across the Delta, the soil is deep alluvial silt and heavy clay, with sand and gravel buried well below the surface rather than at it. Ground like that swells when it is wet and cracks when it dries.

A thin base is where a drive or a path shows trouble first. The clay underneath moves with the seasons, and a shallow layer of stone rides along with it instead of holding its shape.

The fix is a base built up above the native ground rather than dug deeper into it. Flat land with almost no fall means water stands instead of running off, so the surface has to sit high enough to shed it.

Erosion follows the same pattern. Sheet flow crosses flat fields, and floodwater cuts at drive edges and culvert outlets where the ground drops away.

Work runs nearly year round here. The real limits are saturated ground in late winter and early spring and heavy rain, not frozen ground.

Frost heave is not what breaks a drive in this part of Mississippi. The ground moving as saturated clay dries and wets again is.

Materials for Sledge Projects

Fines and screenings are what make a path or walkway feel finished underfoot. Stone Screenings bed pavers and flagstone, fill joints, and top a compacted base with a tight, walkable surface.

For a garden path that needs a finer, more comfortable surface than drive gravel, Walkway Gravel is the material to look at. It is sized for foot traffic rather than tires.

Under all of it, 610 Limestone is the local base. Size No.

Where ground stays soft, Clay Gravel is the long-standing Mississippi choice. It is pit-run gravel with enough clay and fines in it to bind and pack, which suits a graded surface over wet ground.

For drainage, #57 Limestone is clean, free-draining stone used in French drains, foundation drains and concrete work. Drain Rock covers the same ground on a run that holds water.

Delivery to Sledge and the Surrounding Area

You order online, and a dump truck tips the load on site. Quantities are ordered by the ton or by the yard, so the first decision is which one fits how you are measuring.

Each product page has a calculator to help you size the load before you check out. Pick a delivery date at checkout, and the truck brings the material to your address in Sledge.

Coverage reaches the rest of Quitman County as well, including Marks, Lambert and Vance. If your site is outside the city limits, the same bulk delivery applies.

Questions About Gravel and Stone in Sledge

What should I have ready when the truck arrives?

Have the delivery spot clear and reachable so the truck can back in and tip the load. The driver drops the material in one pile and does not spread it, so pick a spot you can work from.

Make sure the ground there will hold a loaded truck, especially after rain when Delta clay softens.

What is the best base under pavers in Sledge?

610 limestone is the local compacting base, and it is what Mississippi yards sell for patio and paver sub-base. On soft or wet ground, clay gravel binds and packs where a graded surface is wanted.

Stone screenings then bed the pavers themselves and fill the joints for a tight finish.

Order Gravel and Stone for Your Sledge Project

Work out your quantity on the product page calculator, then choose your material and delivery date at checkout. Mississippi Rock Supply delivers bulk gravel, stone, sand and soil across Sledge and Quitman County.

Place your order online when you are ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Sledge, MS

What should I have ready when the truck arrives?

Have the delivery spot clear and reachable so the truck can back in and tip the load. The driver drops the material in one pile and does not spread it, so pick a spot you can work from. Make sure the ground there will hold a loaded truck, especially after rain when Delta clay softens.

What is the best base under pavers in Sledge?

610 limestone is the local compacting base, and it is what Mississippi yards sell for patio and paver sub-base. On soft or wet ground, clay gravel binds and packs where a graded surface is wanted. Stone screenings then bed the pavers themselves and fill the joints for a tight finish.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.