610 Limestone in Mississippi
Also sold as Crusher Run
Also known as: #610, crushed limestone base
Once spread and compacted, 610 Limestone creates a close base for Mississippi pads, driveways, and patio work over wet clay ground.
- Size: 3/4 inch minus
- Grading: Crushed stone blended with stone dust and fine particles
- Type: Angular crushed stone
From $382 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Mississippi
Pick a delivery date
Weekday delivery, earliest Oct 29
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About 610 Limestone
Size and Grading
- Size
- 3/4 inch minus
- Grading
- Crushed stone blended with stone dust and fine particles
- Type
- Angular crushed stone
Once it is placed and worked into the subgrade, 610 Limestone becomes a cohesive layer rather than loose stone under the finished surface. Its angular pieces and fines fit together during compaction, providing support for clay gravel driveways, camp roads, patios, and slab pads. That closed structure is useful where the ground beneath the project needs a dependable base.
Yazoo clay and Delta buckshot can retain water for long periods, so a finished grade should direct water away from the pad or driveway. This matters across the Delta, the Pine Belt, and areas near the Gulf Coast where wet ground can affect surface work. Set 610 Limestone on prepared ground, then compact it thoroughly before covering it with the planned surface or building above.
Quickly Calculate How Much You Need
Material: 610 Limestone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (601) 706-3281 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Crusher Run Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Driveway & Parking Subbase
Place crusher run beneath driveways and parking spaces to form a compacted support layer. It helps limit ruts, settlement, and wear from vehicle traffic, especially where wet clay needs a stable base.
Patio & Walkway Foundation
Use compacted crusher run under pavers, flagstone, or concrete. It provides a level base that helps hardscape surfaces stay in place instead of shifting or settling.
Shed & Structure Pads
For a level base under a gazebo, shed, hot tub, or another outdoor structure, compact crusher run into place. The dense layer carries the weight across the pad and helps limit settling that could cause damage.
Grading & Site Preparation
Crusher run can build up low spots, shape drainage grades, and prepare a construction area. Once compacted, it gives equipment and construction work a firm surface.
Why Choose 610 Limestone
Dense Compaction
Crusher run contains crushed stone and fine dust that pack into open spaces during compaction. The resulting base resists movement and settlement under loaded areas.
Self-Cementing Action
Moisture and compaction push the fine particles into the spaces around larger stone pieces. This locks crusher run into a unified mass that gains strength over time and can reduce the need for added stabilizers.
Economical Performance
Crusher run is a mixed-size aggregate used for compacted base layers. It can be installed for a range of construction uses.
Base Material
Use crusher run under driveways, foundations, and structural base work. Around wet clay soils, build the base to support the finished surface.
