Skip to main content
FREE Delivery!|(601) 706-3281

Tallahatchie County, Mississippi ยท Free Delivery

Bulk Aggregates for Patios in Enid, MS

Free delivery to Enid on every order, with loads arriving in as fast as 2 business days.

Delivering to Enid, MS

Free delivery on every order.

  • Free delivery to Enid
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Enid

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Enid

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Enid

Decorative delivered to Enid

Rounded stone for beds, borders and water features.

Sand delivered to Enid

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Enid

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Enid works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Enid.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Enid addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Mississippi Rock Supply handles gravel and aggregate delivery in Enid, MS, and the material that starts most flatwork here is 610 limestone. It is the crushed stone base Mississippi yards sell by that name.

Base and paver work in this part of the state runs nearly year round, with wet spells in late winter and early spring the main interruption.

Across the Loess Bluffs and Brown Loam, the ground is wind-laid loess over clay. It digs easily and stands in a cut, then moves once it is wet.

That shapes what goes under a patio or a walkway.

Ground and Conditions in Enid

Loess is silty and sheds water fast on a slope. A thin base over it shows the failure first: the surface rocks, the joints open, and water finds the low corner.

The fix is a base that carries the load and a path for water to leave.

Gullying is the signature problem of this belt. Bare ground cuts into deep gullies in a single wet season, and slopes slump where loess sits on clay.

Getting water off a patio and into a lined channel matters more than how deep the base goes.

Mild winters bring brief shallow freezes. Repeated wetting and drying, not frost, is what moves the ground here.

Mississippi sets a minimum exterior footing depth of 12 inches, and the local building official fills in the frost line for the jurisdiction.

Materials for Enid Projects

Bedding is where a patio is won or lost. The layer directly under pavers has to sit flat, hold its line, and let water pass or shed.

Pick it for the job, not for the look.

610 Limestone is the compacting base. Size No.

It binds and packs when it is worked in.

Stone Screenings are the bedding layer itself. They bed pavers and flagstone, fill joints, and top a compacted base.

Masonry Sand is the other bedding choice. Mississippi yards sell it as mason sand, and it works for brick and block, paver joints and play sand.

It levels cleanly under flatwork.

Washed Sand is a clean sand for bedding, levelling and fill under slabs and pavers. Use it where you want sand without fines.

Below the bedding, Clay Gravel is pit-run gravel with enough clay and fines to bind and pack. It is a long-standing Mississippi drive and farm-road material over soft ground.

Drainage around a patio calls for clean stone. #57 Limestone suits French drains, foundation drains and concrete aggregate.

Drain Rock handles French drains, drywells and downspout runs on ground that holds water.

Delivery to Enid and the Surrounding Area

Order online and choose your quantity by the ton or by the yard. Each product page has a calculator, and the calculator is the way to size a load.

Pick your delivery date at checkout, and a dump truck tips the material on site in one pile.

Mississippi Rock Supply delivers across Tallahatchie County, including Charleston, Tutwiler, Glendora, Cascilla and Philipp. Enid sits in the county, and the same ground conditions run through it.

Have the drop spot clear before the truck arrives. The load lands where the truck can reach and stays in one pile, so plan the spot with your wheelbarrow and your layout in mind.

Questions About Gravel in Enid

What gravel is best for a driveway in Enid?

For a graded, compacting surface, 610 limestone is the local base. Size No.

Clay gravel is the older Mississippi choice over soft ground, and driveway gravel surfaces an existing drive or tops a compacted base.

On ground that holds water, put clean stone such as #57 limestone in a drain before you surface.

How much material will my project need?

Quantities are ordered by the ton or by the yard, and each product page has a calculator for sizing a load. Measure the area you are covering and the depth you want, then let the calculator turn that into a quantity.

Order that number. If your layout has more than one section, size each one and total them before you order.

Order Gravel and Aggregate in Enid

Start with the calculator on the product page and settle your quantity, then choose a delivery date at checkout. Mississippi Rock Supply delivers 610 limestone, bedding sand, drainage stone, topsoil and fill across Enid and Tallahatchie County.

Place your order online when your numbers are ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Enid, MS

What gravel is best for a driveway in Enid?

For a graded, compacting surface, 610 limestone is the local base. Clay gravel is the older Mississippi choice over soft ground, and driveway gravel surfaces an existing drive or tops a compacted base. On ground that holds water, put clean stone such as #57 limestone in a drain before you surface.

How much material will my project need?

Quantities are ordered by the ton or by the yard, and each product page has a calculator for sizing a load. Measure the area you are covering and the depth you want, then let the calculator turn that into a quantity. Order that number. If your layout has more than one section, size each one and total them before you order.

What access does the truck need at my Enid address?

A clear, level spot the truck can reach and tip in, with nothing parked in the way and no low branches or wires over the approach. If the drop is behind a gate, tell us the width when you order. Soft ground after rain is the usual reason a delivery in Enid has to be moved, so point out anywhere the truck should not drive.