Buy #57 Limestone in Kiln, MS

Mississippi Rock Supply handles gravel and aggregate delivery in Kiln, MS. That work starts with 610 limestone, the crushed stone base Mississippi yards sell for drives and pads.

From there you pick the stone, sand, or soil the job calls for. Order online and a truck tips the load on your site in Hancock County.

Materials for Kiln Projects

Base and driveway surfacing is where most Kiln ground work begins. On flat, wet coastal ground you want a graded material that binds and packs, not clean stone that lets water run straight through.

610 Limestone is the local base course. Size No.

Clay Gravel is pit-run gravel with enough clay and fines in it to bind and pack. It is the long-standing Mississippi drive and farm-road material where you want a graded surface over soft ground.

Once the base is set, Driveway Gravel surfaces an existing drive or tops a compacted base. Gravel has been the ordinary Mississippi drive surface for more than a century.

For drainage, #57 Limestone is clean, free-draining stone for French drains, foundation drains, and drive surfacing. #67 Stone is one size down for the same kind of work.

Finer washed stone covers tight spots. #8 Crushed Stone handles pipe bedding and paver joints, while #89 Crushed Stone is the small washed stone sold on the coast as quarter inch limestone.

Sand and soil finish the job. Masonry Sand beds brick, block, and paver joints, and Top Soil builds a workable layer over tight clay or washed-out ground.

Ground and Conditions in Kiln

Kiln sits on the Coastal Meadows and Gulf Coast Flatwoods, nearly level sand and clay terraces with wet sandy flats and broad shallow depressions. The water table runs close to the surface over much of it.

That changes how you build. Flat ground, a high water table, and heavy rainfall mean water has nowhere to go, so raising and crowning the work matters here more than anywhere else in the state.

A free-draining layer under the surface is what keeps a base from turning soft. Drain Rock and #4 Crushed Stone both move water where the ground holds it.

Erosion is the other side of the same problem. Storm surge and wave action work on the shoreline, tidal scour cuts at marsh edges and bayous, and heavy rain moves sand off flat, poorly drained ground.

RipRap armours banks, culvert outlets, and pond edges. Work runs year round here, with tropical systems and their rainfall in late summer and early autumn as the seasonal risk rather than cold.

Delivery to Kiln and the Surrounding Area

You order online and pick a quantity by the ton or by the yard. Each product page has a calculator if you need to size the load, and you choose a delivery date at checkout.

A dump truck then tips the load on your site in one pile. Have the drop spot clear and reachable, with room for the truck to get in and out.

Mississippi Rock Supply delivers across Kiln and the rest of Hancock County, including Bay St. Louis, Diamondhead, Waveland, and Pearlington.

Questions from Kiln Buyers

Do you supply contractors working in Kiln?

Yes. Contractors working in Kiln and across Hancock County order the same way anyone else does, online, with quantities by the ton or by the yard.

Base material, washed stone, sand, soil, and fill are all available for delivery to a job site. Pick your delivery date at checkout and the truck tips the load where the site allows.

Do you deliver 610 limestone to Kiln, MS?

Yes. 610 Limestone is the crushed stone base this market uses for drives, parking pads, shed pads, and patio sub-base, and it delivers to Kiln and the surrounding Hancock County area.

Order Base, Stone, and Soil for Your Kiln Project

Driveways, parking pads, patio sub-base, drainage runs, and bank work all take the right material for the ground you are on. Mississippi Rock Supply delivers 610 limestone, washed stone, sand, soil, and fill across Kiln and Hancock County.

Order online, size your load, and pick your delivery date.