Skip to main content
FREE Delivery!|(601) 706-3281

Benton County, Mississippi ยท Free Delivery

Rip Rap, Stone and Soil Delivery in Ashland, MS

Free delivery to Ashland on every order, with loads arriving in as fast as 2 business days.

Delivering to Ashland, MS

Free delivery on every order.

  • Free delivery to Ashland
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Ashland

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Ashland

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Ashland

Decorative delivered to Ashland

Rounded stone for beds, borders and water features.

Sand delivered to Ashland

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Ashland

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Ashland works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Ashland.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Ashland addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Mississippi Rock Supply brings gravel and aggregate delivery in Ashland, MS straight to your site. This corner of the state has some of the most varied ground around, from sandy ridge soils to heavy clay that stays soft long after rain.

That mix decides how much 610 limestone a drive or pad needs underneath it.

610 limestone is the compacting base this market specifies for drives, parking pads and building pads. On ground that moves, the base does the work.

Materials for Ashland Projects

Slope, swale and bank work needs coarse, clean stone that lets water move instead of holding it. Heavy rain on steep ground cuts channels fast, and loose soil will not hold a bank on its own.

Rip rap is the heavy answer for that. Use RipRap on bank armouring, culvert outlets, pond edges and slope protection, where a large stone has to stay put under fast water.

For trench bottoms, construction entrances and coarse drainage, #4 Crushed Stone gives you a large clean stone that water passes through. Where the load is severe, Railroad Ballast handles hard standing and track beds.

One size down, #57 Limestone covers French drains, foundation drains and drive surfacing. #67 Stone does the same kind of drainage and concrete work a step smaller.

At the fine end, #8 Crushed Stone suits pipe bedding, paver joints and fine drainage. Stone Screenings bed pavers and flagstone and top a compacted base.

Base and surfacing belong in the same conversation. 610 Limestone is the compacting base under a drive or pad, and Driveway Gravel surfaces an existing drive or tops a compacted base.

Delivery to Ashland and the Surrounding Area

You order online. Pick your quantity by the ton or by the yard, and each product page has a calculator if you want to size the load before you check out.

At checkout you choose the delivery date that works for your site. A dump truck then tips the load on site as one pile, so it helps to know where that pile should land before the truck arrives.

Mississippi Rock Supply delivers across Benton County, including Hickory Flat, Lamar and Michigan City, as well as Ashland itself.

Ground and Conditions in Ashland

Work here runs nearly year round, but the ground in this part of the state is not uniform. The Northeast Hills, Pontotoc Ridge and Flatwoods region holds sandy marl ridge soils, a narrow belt of heavy clay, and loamy hill soils.

Steep, narrow valleys shed water fast, while the clay belt drains very slowly and stays soft long after a rain. Which of the two your site sits on changes the whole approach to a base.

That same split drives the erosion you see: runoff cutting steep slopes and valley walls, bank scour on feeder streams, and washouts where a drive crosses a draw. In the clay belt, late winter is the ground most likely to be too wet to compact.

Freezes here are short and shallow by national standards. Mississippi leaves the frost line blank for each jurisdiction and sets a minimum exterior footing depth of 12 inches.

Questions About Ordering Stone in Ashland

What stone should I use for drainage in Ashland?

It depends on what the water is doing. For a French drain or foundation drain, #57 Limestone is the common choice, with #67 Stone or #8 Crushed Stone stepping down for tighter work.

For trench bottoms and construction entrances, #4 Crushed Stone gives you a larger clean stone. Where a bank or swale is taking fast water, RipRap is the material built for it.

What should I have ready when the truck arrives?

Know where you want the pile. The truck tips the load as one pile on site, so a clear, reachable spot keeps it out of the way of your work and off anything fragile.

Have the area accessible for a dump truck, and have your quantity settled. The calculator on each product page helps you size it before checkout.

Order Stone and Soil for Your Ashland Site

Mississippi Rock Supply delivers bulk gravel, stone, sand, soil and mulch across Ashland and the rest of Benton County, including Hickory Flat, Lamar and Michigan City. Choose your material, set your quantity, and pick a delivery date at checkout.

Order online when your site is ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Ashland, MS

What stone should I use for drainage in Ashland?

It depends on what the water is doing. For a French drain or foundation drain, #57 Limestone is the common choice, with #67 Stone or #8 Crushed Stone stepping down for tighter work. For trench bottoms and construction entrances, #4 Crushed Stone gives you a larger clean stone. Where a bank or swale is taking fast water, RipRap is the material built for it.

What should I have ready when the truck arrives?

Know where you want the pile. The truck tips the load as one pile on site, so a clear, reachable spot keeps it out of the way of your work and off anything fragile. Have the area accessible for a dump truck, and have your quantity settled. The calculator on each product page helps you size it before checkout.

Where will the material be placed?

Wherever you tell us, as long as the truck can safely reach it. Mark the spot before the delivery and someone should be on site to point the driver to it. If nobody can be there, leave clear instructions when you order and we will follow them.