Bulk Gravel and Stone Delivery in Tippah County, MS

Mississippi Rock Supply brings gravel, stone and aggregate delivery in Tippah County, MS to drives, pads, drains and beds that sit on some of the most varied ground in the state.

Start with 610 limestone when you need a base that packs. It is the crushed stone course Mississippi yards sell for compacting base, and it is the right opening move on soft or washed-out ground.

Delivery across Tippah County

Order online. Every product page lists the material, the size and a calculator for working out how much you need.

Pick your quantity by the ton or by the yard, then choose a delivery date at checkout. A dump truck arrives and tips the load on site.

Coverage runs through Ripley, Blue Mountain, Falkner, Walnut, Dumas and Tiplersville, along with the surrounding rural routes.

Materials delivered in Tippah County

Lead with the job. A drive, a patio and a French drain each call for a different stone.

610 limestone carries the most weight here. It is the base under drives, shed pads, parking areas and patio sub-base, and it takes compaction.

Section 304 pays for that work as Granular Material or as Size Crushed Stone Base.

Around the base, add what the job needs. #57 Limestone and #8 Crushed Stone handle drainage and concrete work.

Stone Screenings bed pavers and flagstone. Natural Pea Gravel and River Rock finish beds and borders.

Ground conditions across Tippah County

This part of the state holds the most varied ground in Mississippi. Reddish sandy marl soils on the Pontotoc Ridge sit close to a narrow belt of heavy, poorly drained Flatwoods clay.

Loamy hill soils run over Cretaceous sands, and old Paleozoic chert and limestone reach the surface in the far northeast corner.

That mix decides how a base behaves. Steep, narrow valleys shed water fast, while the Flatwoods clay belt drains very slowly and stays soft long after a rain.

Which of the two a site sits on changes the whole approach. On slow-draining clay, an under-built base pumps and rutting follows.

Erosion shows up as runoff cutting hill slopes and dissected valley walls, bank scour on feeder streams, and washouts where drives cross a draw. Riprap and clean stone answer those spots.

Work runs nearly year round here. The Flatwoods clay belt is the ground most likely to be too wet to compact in late winter.

Freezes are short and shallow by national standards. Mississippi leaves the frost line depth blank in the residential code table for each jurisdiction to fill in, and sets a minimum exterior footing depth of 12 inches.

Choosing the right material

Tippah County sits in the Northeast Hills, Pontotoc Ridge and Flatwoods ground region. Alcorn, Union and Prentiss counties sit in the same region and the same ground.

The ground is the same across all four, so the base and drainage choices do not change at the county line. Match the stone to the soil under your own site.

On the sandy marl of the Pontotoc Ridge, 610 limestone compacts into a firm pad and 57 stone moves water away. On Flatwoods clay, drainage matters first: clean stone and clay gravel, not a fines-heavy fill.

Order 610 limestone for your Tippah County project

For drives, pads and patio sub-base, 610 limestone is the base to start from in this county. It packs, it takes traffic, and it is sold by the name Mississippi yards use.

Order online from Mississippi Rock Supply by the ton or the yard, pick your delivery date, and a truck will tip the load on site.